34 Event V3 Manual
Creating Memories & Chases
7.42 METHOD 2: Using The Menu
Press the Edit button.
Press the Memory button. Enter the Memory number (0 - 999) to be
edited.
Move the cursor to the CH# (channel) field. Use the 1 (On)/2 (Off) button
or keypad to enter the new channel number.
Move the cursor to the TO# field. Use the 1 (On)/2 (Off) button or keypad
to enter the new number for the range of channels to be edited.
Move the cursor to the AT (value) field. Use the 1 (On)/2 (Off) button or
keypad to enter the new level values.
Diagram 7E
☞
1
3
2
Example:
In the menu illustrated in diagram 7E channels 10 through to 15 have been
set to 50%.
TIP: As each channel or group of channels is adjusted, using either edit method, the
changes are stored temporarily so there is no need to press Record to save each
individual change.
4
5
Press the Record button. The LCD will display the percentage of available
Memory space which has been used and remains, and will then return to the
standard screen after the button is released.
6