Jands Event Plus User Manual

64 Event V3 Manual
Managing Memories & Chases
10.20 Assign Chase
Press the Assign button.
Press the Chase button to open the Assign Chase menu.
Use the 1 (On)/2 (Off) button or keypad to enter a Chase number.
Press the Flash button beneath the Assign fader to be used to control this
Chase.
Once the Flash button has been pressed, the Assign menu is closed and you will see
the Assigned Chase has replaced whatever was previously controlled by the Assign
Master.
1
2
Diagram 10C
3
4
☞

Jands Event Plus Specifications

General

Brand	Jands
Model	Event Plus
Category	Lighting Equipment
Language	English