120 Event V3 Manual
Advanced Features
19.00 Advanced Desk Options
19.10 Setting Default Infade and Outfade Times
Before recording Memories that will be used in a crossfade Stack it can be
convenient to set default fade times to avoid the necessity of setting times for each
Memory.
Diagram 19A
Note: Default times will only be added to new Memories. It is possible to change the
setting for any Memory later.
Press the Setup button to open the Setup menu.
Move the cursor to the PREF (Preferences) field.
Press the 1 (On) button to open the Set Preferences menu.
Move the cursor to the TIMES field and set a time in the format MM:SS or
M:SS.s (M=minute, S=seconds, s = tenths of a second).
Press Exit to close this menu (press Exit several times to close all menus).
1
2
3
4
5
☞
To Next Page
Loading...