76 Event V3 Manual
Managing Memories & Chases
12.30 Infade/Outfade - Adding Fade Times
Fade times can be added to Memories and Chases so that they can then be played
back as part of a Stack with automatic timed crossfades.
12.31 Adding Fade Times to a Memory
Press the Memory button.
Enter the required Memory number (0 - 999) using the numeric keypad or
alternatively use the 1 (On)/2 (Off) button to change the displayed number.
Use the arrow button to move the cursor to the INFADE field.
Enter an Infade time of up to 99 minutes 59 seconds using the numeric
keypad or alternatively use the 1 (On)/2 (Off) buttons to change the
existing value.
Use the arrow button to move the cursor to the OUTFDE (Outfade) field.
Enter an Outfade time of up to 99 minutes 59 seconds using the numeric
keypad or alternatively use the 1 (On)/2 (Off) buttons to change the
existing value.
Press the Exit button if no more Memories are to be set.
Diagram 12G
1
2
☞
3
4
5
6
7
NOTE: Do NOT press the Record button if only entering or changing the fade times.
TIP: Set a default fade time in Setup:Pref:Time
To Next Page
Loading...
Need help?
General
