Jands Event Plus User Manual

78 Event V3 Manual
Managing Memories & Chases
12.32 Adding Fade Times to a Chase
Press the Chase button.
Enter the required Chase number (0 - 999) using the numeric keypad or alter-
natively use the 1 (On)/2 (Off) button to change the displayed number.
Move the cursor to the MORE field, and keep moving the cursor to the
INFADE field after the MORE window of Chase opens.
Enter an Infade time of up to 99 minutes 59 seconds using the numeric
keypad or alternatively use the 1 (On)/2 (Off) button to change the exist-
ing value.
Diagram 12H
1
2
Use the arrow buttons to move the cursor to the OUTFDE (Outfade) field.
Enter an Outfade time of up to 99 minutes 59 seconds using the numeric
keypad or alternatively use the 1 (On)/2 (Off) button to change the exist-
ing value.
Press the Exit button if no more Chases are to be set.
3
4
5
6
7
☞
NOTE: Do NOT press the Record button if only entering or changing the fade times.

Jands Event Plus Specifications

General

Brand	Jands
Model	Event Plus
Category	Lighting Equipment
Language	English