Jands Event Plus - Copying a Chase; Copying a Patch

132 Event V3 Manual
Advanced Features
22.20 Copying a Chase
Press the Clear button to open the Clear/Copy menu.
1
Diagram 22B
Move the cursor to the CHSE (Chase) field
Press the 1 (On) button to open the Copy Chase menu.
Move the cursor to the CHS:(Chase:) field (the number of the Chase to be
copied).
Set the Chase number to be copied.
Move the cursor to the TO: field (the number of where the chase is to go).
Set the new Chase number.
Move the cursor to the CONFIRM field.
Press the 1 (On) button to copy the chase.
Note: Move the cursor to the FUNCTION: field and press the 1 (On) button to toggle the
field from Copy to Clear if necessary.
2
4
3
5
6
7
8
9
Example:
Diagram 22B shows Chase 1 being copied to Chase 10.
☞