Jands Event Plus User Manual

© Jands Electronics July 1995
Event V3 Manual 99
Diagram 14C 1
Diagram 14C
2
14C Add/Solo fader,
Grand Master fader.
▼
14.60 Rate Control
The Rate Control scales the speed of all Chases that are running. This control should
normally be set to the mid or 12 o’clock position. Chases will then run at the speed
set in the Chase menu. Turning the control clockwise will speed the chase(s) up,
turning the control counter clockwise will slow the chase(s) down.
Diagram 14D
14.40 Add / Solo Fader
This fader controls the level of the Flash buttons.
14.50 Grand Master Fader
This fader controls the level of all console outputs except the Flash buttons.
2
1
14D Rate Control
▼

Jands Event Plus Specifications

General

Brand	Jands
Model	Event Plus
Category	Lighting Equipment
Language	English