Jands Event Plus - Setting the Intensity of the Desklights

140 Event V3 Manual
Advanced Features
26.00 Setting the Intensity of the
Desklights
The Event can be fitted with optional gooseneck type desklights. The brightness of
the lights can be set in the Setup Desk Display menu.
1. Press the Setup button to open the Setup menu.
2. Move the cursor to the DESK field and press the 1 (On) button to open the
Set Desk menu.
3. Move the cursor to the DISPLAY field and press the 1 (On) button to open
the Setup Display menu.
4. Move the cursor to the LAMP field and adjust the setting between 0 and FF
using the 1 (On)/2 (Off) buttons or the numeric keypad.
5. Press the Exit key to close the menu.
NOTE: The desk lights can NOT be dimmed off.