74 Event V3 Manual
Managing Memories & Chases
12.22 Changing the NEXT Field - Chase
Press the Chase button.
Enter the required Chase number (0 - 999) using the numeric keypad or
alternatively use the 1 (On)/2 (Off) buttons to change the displayed Chase
number.
Move the cursor to the MORE field and keep moving the cursor to the NEXT
field after the MORE window of Chase opens.
Enter the number of the Chase which is to follow this Chase.
Press the Exit button if no more Chases are to be set.
2
Diagram 12F
1
3
4
5
TIP: If in the Chase menu you want to change the setting from a Chase number to a
Memory, use the left arrow button to move the cursor over the C and then press
the 1 (On) button to change the C to a M, (this can also be achieved by pressing
the flash button marked M).
NOTE: Do NOT press the Record button if only entering or changing the NEXT field.
☞
To Next Page
Loading...
Need help?
General
