Jands Event Plus User Manual

42 Event V3 Manual
Creating Memories & Chases
8.60 Adding a Dipless Crossfade Between Steps (X)
1. Move the cursor to the X field and press the 1 (On) button to turn the
crossfade on (I).
2. When X fade is turned on the attack (/) and decay (\) fields are disabled and
the menu changes to show the % (percentage) field. The % field sets what
percentage of the total crossfade time each step is fully on.
Example:
1. Set the Chase speed to 6 BPM (1 step every 10 seconds)
2. Set the % field to 50
Step 1 takes 2.5 secs to fade in, stays on for 5 secs and then takes 2.5 secs
to fade out.
TIP: Xfade is automatically disabled at chase speeds greater 300BPM.
Diagram 8F + 8A, 8G
☞
%
05
\
0
X
0
/
0
%
0
X
I 5
F
%
0
F
▼
8F Adding a Dipless Crossfade Between Steps (X)
8G How Crossfade works in a Chase
▼
25%
50%
75%
100%
12345678910
Dipless Crossfade
Between Steps
Time
Step 1
Step 2
Level

Jands Event Plus Specifications

General

Brand	Jands
Model	Event Plus
Category	Lighting Equipment
Language	English