Jands Event Plus User Manual

44 Event V3 Manual
Creating Memories & Chases
8.80 Recall a Chase - Introduction to Assign
If you are unable to see the Chase number / name above one of the Assign faders
you have probably recorded a Chase number that is not part of the Page that is loaded
to the Assign Masters. There are two ways to get the Chase you want.
Diagram 8H
8.81 METHOD 1: Change Page
The Event has Pages preset so that Chase 1 is on Page 1,Chase 2 is on Page 2 and
so on. If you’ve recorded Chase 10 you will want to change to Page 10:
Press Page.
Enter the Page number.
Move the cursor to the LOAD field.
Press the 1 (On) button.
1
2
3
4
TIP: If you don’t see anything check that the Grand Master is at full. If you still don’t
see what you expected try recording again, paying careful attention to the
procedures above.
☞

Jands Event Plus Specifications

General

Brand	Jands
Model	Event Plus
Category	Lighting Equipment
Language	English