Jands Event Plus - Chases; Recording a Chase-Using the Menu

36 Event V3 Manual
Creating Memories & Chases
8.00 Chases
Chases are recorded in the same way as Memories.
8.10 Recording a Chase - Using The Menu
Press the Chase button.
Use the Preset faders (and any other console controls) to set up the lighting
output required for the first step of the Chase.
Enter the Chase number (0 - 999) to be recorded.
Press the Record button.
The first step of the Chase is recorded and the Step field automatically
changes to the next step number.
Set up the lighting output required for the next step of the Chase.
Press the Record button.
• Continue recording new steps until the Chase is complete (Max. no. 99).
Press the Exit button if no more Chase steps are to be recorded.
1
Diagram 8A
3
4
7
6
5
2
☞