Jands Event Plus User Manual

108 Event V3 Manual
Advanced Features
Example 3:
The Increment between the first Memory of each Page can be
changed to suit a particular numbering scheme or to allow
overlapping Pages. In this case Memories per Page has been
set to 20 and the Increment to 100. Chase is on Auto.
Page # Assign Faders Control
0 1 - 20 Memories 0 - 19
21 Chase 0
1 1 - 20 Memories 100 - 119
21 Chase 1
2 1 - 20 Memories 200 - 229
21 Chase 2
5 1 - 20 Memories 500 - 519
21 Chase 10
Example 1:
When shipped from the factory the Event Plus has the EDIT
PAGE menu set as described below. The makeup of each Page
will be:
Page # Assign Faders Control
0 1 - 20 Memories 0 - 19
21 Chase 0
1 1 - 20 Memories 20 - 39
21 Chase 1
2 1 - 20 Memories 40 - 59
21 Chase 2
10 1 - 20 Memories 200 - 219
21 Chase 10
Example 2:
The Number of Memories can be changed to suit particular
applications. A show might call for a number of Stacks and
Chases to be permanently set on Assign faders 12 - 24. In this
case the operator can set the number of Memories per Page
to 10 with an Increment of 10. The Auto Chase load is left on
in this example - note that it loads on the next fader after the
last memory.
Page # Assign Faders Control
0 1 - 10 Memories 0 - 9
11 Chase 0
1 1 - 10 Memories 10 - 19
11 Chase 1
2 1 - 10 Memories 20 - 29
11 Chase 2
10 1 - 10 Memories 100 - 119
11 Chase 10
15.42 Restoring the Factory Settings for Page
To restore the default settings for EDIT PAGE :
1. Press the Edit button.
2. Press the Page Button.
3. Move cursor to the RESTORE field.
4. Press the 1 (On) button to set the restore function
"ON".
5. Press Exit to return to the standard screen.
NOTE: If the CHS: field is changed from AUTO to OFF, no Chases
are loaded with each Page.

Jands Event Plus Specifications

General

Brand	Jands
Model	Event Plus
Category	Lighting Equipment
Language	English