EasyManua.ls Logo

JRC ECDIS - Page 139

JRC ECDIS
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22-5 Section 22 Specifications
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
22
23
25
26
27
付録
Water temperature MTW > MDA
Atmospheric pressure MMB > MDA
Humidity MHU > MDA
AIS VDM, VDO
TT data TTM, TLL, TTD, TLB
AIS target data TTM, TLL, TTD
Alert
ACK, ALR, ACN, ALF, HBT
NAVTEX NRX or JRC format
Azimuth/distance to the destination RMB > BWC > BWR (Plotter option)
Water current CUR
Automatic sailing and Track control (Can be received during automatic sailing or track control)
TOKIMEC : Autopilot (KELVIN) ROT
TOKYO KEIKI : PR-6000, HCS-9000 HTD
YDK : PT500, PT900
HTDZDL
ALPHATRON : Alphapilot MFM
HTDZDL
Transmittable signals
Own ship data OSD
Watch Timer Reset EVE*2
TT data TTM, TLL, TTD, TLB
Remote maintenance data JRC format
Alert
ACK, ALR, ACN, ALC, ALF, ARC, HBT
Route information ECDIS information notification (PJRC, EIF00/PJRC,
EIS00/WPL)
Autopilot information ECDIS information notification (PJRC, EIF00)
NAVTEX NRM
Azimuth/distance to the destination RMB, BWC
Automatic sailing and Track control (Can be transmitted during automatic sailing or track control)
TOKIMEC : Autopilot (KELVIN) CTS, HTR
TOKYO KEIKI : PR-6000, HCS-9000 HTC, XTE, VBW, VTG, PJRCI, HSC
YDK : PT500, PT900 HTC, XTE, VBW, VTG
ALPHATRON : Alphapilot MFM HTC, XTE, GLL, VHW, VTG, PNEY,001, PNEY,002
Navigation Data DBK, DPT, DTM, GGA, GLL, HDG, HDT, MDA, MWV, NSR,
POS,RMB, RMC, ROT, RSA, THS, VBW, VDR, VTG, VWR,
VWT, XDR,ZDA, HBT, BWC, RTE, WPL, HSC, OSD, RSD,
XTE, ZTG
Visual range
Visual range 1.05m from the center of display
i. The measuring precision of the speed sensor complies with IMO Resolution MSC.96(72).
The measuring precision of the GPS sensor complies with IMO Resolution MSC.112(73).
*2 When the movement amount of the cursor exceeds the set value of Trackball Threshold, a message is output at
the interval set to Reset Interval. The value is set at installation.

Table of Contents

Related product manuals