JRC ECDIS - Displaying the [AIS] Dialog; Setting the AIS Password

17-21 Section 17 Adjusting and Setting up Equipment (for Services)
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
APP A
APP B
17.3.6 Setting the AIS password
Set the AIS password by using the [AIS] dialog.
17.3.6.1 Displaying the [AIS] dialog
When [Settings] is selected in the 1st classification pane and [AIS] is selected in the 2nd classification
pane, the [AIS] dialog is displayed in the edit/result pane.
17.3.6.2 Setting the AIS password
Set the following item on the [AIS] dialog.
Setting item Description of setting Setting value
Setting Password To change Voyage data from the external
device, JHS-183 requires the password.
When the AIS password is changed,
change this setting value.
When the password is not required, this
setting value is ignored in (JHS-182).
Up to 32 characters (numeric
value only)