JRC ECDIS User Manual

Appendix B Menu List and Materials B-22
B.1.12 Settings
Signal Process(Basic) ECDIS *
* Case where the radar is connected
Gain
Sea
Rain
IR
Target Enhance
Echo Process
Signal Process ECDIS
* Case where the radar is connected
Video Latitude
Video Noise Rejection
Auto Dynamic Range Control
(Process Switch)
Process Switch
2nd Process Mode *
* Case where [Process Switch] is set to [Off]
Process Switch Range *
* Case where [Process Switch] is set to [Range Fix]
Fast Target Detection
Association ECDIS
Association
TT/AIS Priority *
TT1/TT2 Priority *
* Case where [Association] is set to [On]
Ship's Dynamic Trait ECDIS
Reach
Turn Mode
(Turn Set)
Radius
Rate
Acceleration
Deceleration
Filter ECDIS
AIS
TT
Sector Filter
Start Angle
End Angle
Ring Filter
Distance
Filtering Mode
Sector tab
Make Target Filter
Start Angle *
End Angle *
* Case where [Make Target Filter] is set to [On]
Ring tab
Make Target Filter
Distance *
* Case where [Make Target Filter] is set to [On]
ECDIS CONNING

JRC ECDIS Specifications

General

Display Type	LCD
Radar Overlay	Yes
AIS Integration	Yes
Operating Temperature	-15°C to +55°C
Chart Format	S-57, S-63
Power Supply	24V DC
Interfaces	Ethernet, USB
Compliance	IMO