Section 18 Playing Back Data Recorded During Navigation 18-4
Upper Part of the Playback Controller
Number Name Function
1 Playback time The playback time is displayed.
2 [X] (Close) button Exits playback.
3 Playback slider The progress of playback is displayed. The playback position
can be changed by moving the slider control.
•
During playback, the pointer of the playback slider cannot be
dragged.
• During halt/temporary halt, the pointer of the playback slider
can be dragged to any position.
4 View switch buttons Switches between full display/simple display of the control
section and the playback information section.
[Control] Section
Number Name Function
5 Playback speed
selection box
Select the playback speed from the list. (x1, x2, x4, x10, x30,
x60)
6 Playback button Executes playback. When this button is clicked during playback,
the playback speed changes in the following order: x1 x2
x4 x10 x30 x60 x1 .....
7 Pause button Pauses playback. To resume, click the Playback button again.
8 Stop button Stops playback. When playback is stopped, the playback time
returns to the playback start time and the playback slider control
returns to the playback start time position.
9 Drive selection box Select a data drive storing navigation record data from the list.
10 Folder tree Folders storing navigation record data are displayed in tree view.
11 Playback start time The playback start time is displayed. By clicking the calendar
icon, you can display the calendar picker and change the
playback start time.
Specify the playback time range concurrently with the playback
end time. The range can be specified within the range from the
start to the end of the recording of log data.
12 Playback segment The playback segment is displayed. (When a playback list has
not been selected, this box is blank.)
13 Playback end time The playback end time is displayed. (When a playback list has
not been selected, this box is blank.) By clicking the calendar
icon, you can display the calendar picker and change the
playback end time.
Specify the playback time range concurrently with the playback
start time. The range can be specified within the range from the
start to the end of the recording of log data.
14 Playback list Each record data is displayed in the order of the oldest time to
the latest time. When [Oldest Date] or [Latest Date] on the title
bar are clicked on, the data is sorted in the order of the oldest
data or latest data.
To Next Page
Loading...
Need help?
General
