JRC ECDIS - Page 175

A-23 Appendix A Alert and Maintenance INFO List
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
APP A
23
24
25
Message Explanation Advice
Log #n (Communication
failed, Direct)
Communication with Log
#n cannot be performed
via Serial.
Check the condition of Log #n and Serial.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Log #n (Communication
failed, GIF-Direct)
Communication with Log
#n cannot be performed
via Serial.
Check the condition of Log #n, GIF and
Serial.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Log #n (Communication
failed, GIF-Main LAN)
Communication with Log
#n cannot be performed
via Main LAN.
Check the condition of Log #n, GIF and Main
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Log #n (Communication
failed, GIF-Sub LAN)
Communication with Log
#n cannot be performed
via Sub LAN.
Check the condition of Log #n, GIF and Sub
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Log #n (Communication
failed, Main LAN)
Communication with Log
#n cannot be performed
via Main LAN.
Check the condition of Log #n and Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Log #n (Communication
failed, Sub LAN)
Communication with Log
#n cannot be performed
via Sub LAN.
Check the condition of Log
#n and Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Log
Selector(Communication
failed, Direct)
Communication with Log
Selector cannot be
performed via Serial.
Check the condition of Log Selector and
Serial.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.