JRC ECDIS - Page 36

Section 17 Adjusting and Setting up Equipment (for Services) 17-26
Setting item Setting contents Setting value
New Sharing of a new route can be set to On/Off. On: Default
Off
Old Sharing of an old route can be set to On/Off. On
Off: Default
Data Route Send Data route transmission can be set to On/Off.
On:
[Send to GPS] of [Route Planning]-[▼] is enabled.
Transmission log is displayed in the Status Log column of
the Send to GPS screen.
Off:
[Send to GPS] of [Route Planning]-[▼] is disabled.
On: Default
Off
Data Route Receive Data route reception can be set to On/Off.
On:
Reception log is displayed in the Status Log column of the
Send to GPS screen.
Off:
Reception log is not displayed in the Status Log column of
the Send to GPS screen.
On: Default
Off