JRC ECDIS User Manual

Section 19 Maintenance & Inspection 19-4
19.1.3.1 Confirming Software Information
When you want to use a USB flash memory to read or write a file, make sure in
advance that the USB flash memory is not affected by a computer virus. If the
indicator is infected with a virus, other equipment will also be infected, with the result
that a trouble will occur.
Before removing the USB flash memory, check for the access lamp of the USB flash
memory and make sure that it is not being accessed. If you remove the USB flash
memory when it is accessed, data may be destroyed and a trouble may occur.
Software information can be confirmed.
1 Click on the [Menu] button on the left Tool Bar.
The menu is displayed.
2 Click on the [Maintenance] - [System Information] button on the menu.
The [System Information] dialog box appears.
3 Click on the [Software] tab.
The software information is displayed.
[1] [X] button
Click on this button to close the [System Information] dialog box.
[1]
[2]
[3]

JRC ECDIS Specifications

General

Display Type	LCD
Radar Overlay	Yes
AIS Integration	Yes
Operating Temperature	-15°C to +55°C
Chart Format	S-57, S-63
Power Supply	24V DC
Interfaces	Ethernet, USB
Compliance	IMO