JRC JMR-5400 Series User Manual

A-3 Appendix A Alert List
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP B
A.2 Warnings
Message
Explanation
AIS ACT Max The AIS activation target count has reached the
maximum activation target count.
AIS(invalid) There is a format error or a status error of the AIS
data.
AIS(unavailable) The AIS data cannot be received.
AIS Max Target The AIS target count has reached the maximum
target display count.
Approach to critical point The position is near a critical point.
Arrived at WOL The ship has arrived at a WOL.
Arrived at WPT The ship is inside of a course change point circle.
RADAR Proc. Unit #n(Communication error,
DSP #m)
There is an error in communication with DSP #m.
RADAR Proc. Unit #n(Program Load Failed,
DSP #m)
DSP #m cannot be started.
RADAR Proc. Unit #n High TEMP The temperature of RADAR Proc. Unit is too high.
RADAR Proc. Unit (Process Error) The control circuit in the radar antenna is
abnormal.
RADAR Proc. Unit (SYNC Signal Lost) RADAR Proc. Unit detected an error in an interrupt
signal.
Terminal Board(Communication failed) Communication with terminal board cannot be
performed via LAN.
CMP RelaySoftware(Communication error) There is an error in communication with
Companion MPU.
COG/SOG(invalid) There is a format error or a status error of the
SOG/COG data.
COG/SOG(not plausible) There is a range error of SOG/COG data.
COG/SOG(unavailable) The SOG/COG data cannot be received.
CPU Core#n Clock down The CPU core has been underclocked.
CPU Core#n High TEMP The CPU core temperature is too high.
CPU Fan The RPS fan revolution per minute has been
decreased.
CPU High TEMP The CPU temperature is too high.
DATUM(unavailable) The DTM data cannot be received.
Depth(invalid) There is a format error or a status error of the
Depth data.
Depth(unavailable) The Depth data cannot be received.
DSP(Heading Data) There is an error in the heading data received by
D S P.
DSP(Sweep Data) There is an error in the sweep data received by
D S P.
External TT#n(invalid) There is a format error or a status error of the
External TT#n data.
External TT#n(unavailable) The External TT#n data cannot be received.

JRC JMR-5400 Series Specifications

General

Brand	JRC
Model	JMR-5400 Series
Category	Marine Equipment
Language	English