JRC JMR-5400 Series - Section 4: Route Planning; Overview of Destination Route

4-1 Section 4 Route Planning
4
Section 4 Route Planning
Ship routes can be created and edited in Route Planning.
4.1 Overview of the Destination Route
Destination routes can be created if the optional plotter is installed on the JMR-5400 series ship radar
equipment.
4.1.1 Flow of destination route creation
The flow of destination route creation is as follows.
Register multiple proposed destinations.
See 4.4.1 Registering a new proposed destination.
↓
Connecting proposed destinations by legs
See 4.4.2 Creating a new destination route.
Example destination route
In this example, proposed destinations 001 to 004 are registered.
Proposed destinations 004, 003, and 001 are connected by legs to create the destination route 1.
Proposed
destination
Proposed destination No.
Route No.
Route
Route being
monitored