JRC JMR-5400 Series - Displaying the Chart by Inputting the Position

Section 6 Settings 6-2
6.1.1.3 Deleting a port
Procedure
Use the following operation to display the [My Port List] dialogue.
[Menu] button → Chart → My Port List
The following table describes operations of the [My Port List] dialogue.
Setting item
Description
Setting value
My Port List
Select a list you want to delete by clicking on it.
—
[Delete] button
Clicking on this button deletes the selected port from
the list.
6.1.2 Displaying the chart by inputting the position
Input a position to display the chart on the desired position.
Procedure
Use the following operation to display the [Off Centre by Entering Position] dialogue.
[Menu] button → Chart → Off Centre by Entering Position
The following table describes operations of the [Off Centre by Entering Position] dialogue.
Setting item
Description
Setting value
[Jump to the following
position] button
Clicking on this button centres the chart on the
coordinates input in the latitude and longitude fields.
—
Latitude/longitude
field
When this dialogue is opened, the current centre
coordinates of the chart are displayed.
Click on the field and use the software keyboard to
enter the coordinates to centre the chart on.
—