JRC JMR-5400 Series User Manual

3-7 Section 3 Operations on the Chart Screen
3
3.3 Displaying the EBL/VRM Button
The EBL/VRM button is used to create and configure EBL/VRM.
In plotter mode, the EBL/VRM button is displayed on the [EBL/VRM readout] dialogue. The following
describes how to display the [EBL/VRM readout] dialogue.
Procedure
Use the following operation to display the [EBL/VRM readout] dialogue.
[Menu] button → Tools → EBL/VRM
Memo
In radar mode, the EBL/VRM button is always displayed. Operation of the EBL/VRM button is the
same in both the plotter and radar modes. For details, see the Instruction Manual of the ship radar
equipment.

JRC JMR-5400 Series Specifications

General

Brand	JRC
Model	JMR-5400 Series
Category	Marine Equipment
Language	English