JRC JMR-5400 Series User Manual

5-3 Section 5 Route monitoring
5
5.1.2 Ending the route monitoring
5.1.2.1 When route monitoring is started from the [Route
Monitoring] dialogue
When route monitoring is started from the [Route Monitoring] dialogue, Use the following operation to
end the route monitoring.
1 Activate the [Route Monitoring] dialogue that is behind the [Voyage Information]
dialogue.
2 Click on the [Unload] button.
Monitoring of the currently selected route will end.
5.1.2.2 When route monitoring is started from the
[Route/Destination] dialogue
When route monitoring is started from the [Route/Destination] dialogue, first Use the following
operation to open the [Route Monitoring] dialogue.
[Menu] → Route Monitoring
1 Ensure that the number for the route being monitored is displayed in the [Route No.]
field.
2 Click on the [Unload] button.
Monitoring of the currently selected route will end.

JRC JMR-5400 Series Specifications

General

Brand	JRC
Model	JMR-5400 Series
Category	Marine Equipment
Language	English