Section 3 Operations on the Chart Screen 3-6
3.2.6 Operation via [CCRP EBL/VRM] -
[Make EBL1] or [Make EBL2]
Operations are common in EBL1 and EBL2. The following description is based on EBL1.
1 Right-click on the chart to display the context menu.
2 Select [CCRP EBL/VRM] - [Make EBL1] from the context menu.
EBL1 is displayed and the measurement base point is displayed on the ship.
3 Move the cursor to any position and click.
The ELB1 direction will be fixed.
3.2.7 Operation via [CCRP EBL/VRM] -
[Make VRM1] or [Make VRM2]
Operations are common in VRM1 and VRM2. The following description is based on VRM1.
1 Right-click on the chart to display the context menu.
2 Select [CCRP EBL/VRM] - [Make VRM1] from the context menu.
VRM1 is displayed and the measurement base point is displayed on the ship.
3 Move the cursor to any position and click.
The VRM1 distance will be fixed.
To Next Page
Loading...
Need help?
General
