JRC JMR-5400 Series User Manual

4-5 Section 4 Route Planning
4
(5) (start point) button
To create or edit a route, enter a number in the [No.] field and then click on the start point button.
(6) (end point) button
Click on it to determine the creation/edit of the route.
4.3.1 Key assignment on the operating unit
The functions of the above buttons of the [Route/Destination] dialogue are assigned to the keys of the
operating unit as described in the following table.
This key assignment takes priority only while the [Route/Destination] dialogue is displayed.
Button on the dialogue
Standard operating unit
Advanced operating unit
[Enter] button
Left-click
Left-click, Input key
[Clear] button
Right-click
Right-click, CLR key
Start point button
—
Start point key
End point button
—
End point key

JRC JMR-5400 Series Specifications

General

Brand	JRC
Model	JMR-5400 Series
Category	Marine Equipment
Language	English