Section 4 Route Planning 4-4
4.3 Opening the [Route/Destination]
Dialogue
The [Route/Destination] dialogue is used to register proposed destination, create and edit a route.
Procedure
Use the following operation to open the [Route/Destination] dialogue.
[Menu] button → Route Planning → Set Route/Destination
The following describes input fields and buttons for creating and editing a route on the
[Route/Destination] dialogue.
Memo
The [Route/Destination] dialogue
is also used for route monitoring. The buttons for route
monitoring are described in relevant sections.
(1) Title Bar
The title [Route/Destination] is displayed on the dialogue.
Enter a number in the [No.] field. The contents of the dialogue change depending on whether the
number is a proposed destination number or route number or new or existing number.
(2) [No.] input field
Enter the proposed destination number or route number.
Then, if the start point button is pressed, the input number is deemed as a route number.
Valid values are 1 to 999.
(3) [Enter] button
When creating a destination route, enter a destination number and then click on the [Enter] button.
(4) [Clear] button
Enter a destination number and click on the [Clear] button to delete the proposed destination.
Proposed destinations used for the destination route cannot be deleted.
To Next Page
Loading...
Need help?
General
