Section 3 Operations on the Chart Screen 3-4
[CCRP EBL/VRM] menu
This context menu is used to operate EBL/VRM using the ship position as the measurement base
point.
The following menu items are available.
• Make EBL1/VRM1
• Make EBL2/VRM2
• Make EBL1
• Make EBL2
• Make VRM1
• Make VRM2
3.2.1 Operation via [Dropped EBL/VRM] -
[Make EBL1/VRM1] or [Make EBL2/VRM2]
Operations are common in EBL1/VRM1 and EBL2/VRM2. The following description is based on
EBL1/VRM1.
1 Right-click on the chart to display the context menu.
2 Select [Dropped EBL/VRM] - [Make EBL1/VRM1] from the context menu.
EBL1 is displayed and the measurement base point is displayed on the cursor.
3 Move the cursor to any position and click.
The measurement base point will be fixed.
4 Move the cursor to adjust the direction and distance and click at any position.
The ELB1 direction and VRM1 distance will be fixed.
3.2.2 Operation via [Dropped EBL/VRM] -
[Make EBL1] or [Make EBL2]
Operations are common in EBL1 and EBL2. The following description is based on EBL1.
1 Right-click on the chart to display the context menu.
2 Select [Dropped EBL/VRM] - [Make EBL1] from the context menu.
EBL1 is displayed and the measurement base point is displayed on the cursor.
3 Move the cursor to any position and click.
The measurement base point will be fixed.
4 Move the cursor to adjust the direction and click at any position.
The ELB1 direction will be fixed.
To Next Page
Loading...
Need help?
General
