JRC JMR-5400 Series - Page 57

2-31 Section 2 Basic Operations and Mode Screen
2
2.5.2.2 Unloading the destination route data (data deletion from
the screen)
1 Click on the [File Load/Save] tab.
2 Select [Plotter Route] from the [File Type] combo box.
3 Click on the [Delete Current Route and Destinations] button.
A confirmation dialogue is displayed.
4 Click on the [OK] button.
The stored destination route data is deleted from the screen.
2.5.2.3 Saving the destination route file
1 Click on the [File Load/Save] tab.
2 Select [Plotter Route] from the [File Type] combo box.
3 Click on the [Save Current Route and Destinations] button.
A confirmation dialogue is displayed.
4 Enter the file name in the input field, and click on [OK] to save the file.
The stored route and destination are saved.