JRC JMR-5410-6X - Information Monitor Windows; Target INFO

Section 2 Name and Function of Each Unit 2-18
2.3.1 Information monitor windows
Information monitoring related windows is as follows.
Item Contents Related section
Target INFO TT/AIS movement information 2.3.1.1 Target INFO
TT List TT target risk sequence list 2.3.1.2 TT List
AIS List AIS target risk sequence list
2.3.1.3 AIS List
AIS Detail INFO
Detail information relating one AIS
target
2.3.1.4 AIS Detail INFO
2nd PPI Radar 2nd PPI
Displayed for a 26-inch screen.
2.3.1.5 2nd PPI
Current/Wind Wind speed and current information 2.3.1.6 Wind/Current Block
Conning Conning 2.3.1.7 Conning
2.3.1.1 Target INFO
Target INFO is the display monitor window that displays movement information of TT/AIS.
In Target INFO, TT information, AIS information, and AIS extended information are displayed.
TT information
The following information items are displayed.
Memo
Some items may not be displayed due to the equipment setting differences.
Displayed
information
Explanation
TT ID Displays the identification number (1 to 30) of a TT target.
*The maximum number of TT ID numbers that can be displayed is 100 when
options are available.
Ship’s Name Displays the ship’s name.
When [Ship’s Name] is selected after selecting [View] - [Target] - [TT Target ID],
the ship’s name is displayed instead of TT ID.
BRG Displays the bearing of a TT target.
When [▼] that is shown next to the bearing is pressed, a TT cancellation menu
is displayed, and when the item is selected, the specified TT is cancelled.
Range
Displays the distance to a TT target.
COG or CTW Displays the course of a TT target. Displayed as "COG" in the course over the
ground mode and "CTW" in the course through the water mode.
SOG or STW Displays the ship speed of a TT target. Displayed as "SOG" in the speed over
the ground mode and "STW" in the speed through the water mode.
CPA
Displays the distance of the closest point of approach to the TT target.
TCPA
Displays the arrival time of the closest point of approach to the TT target.
BCR
Displays the bow crossing range of a TT target.
BCT
Displays the bow crossing time of a TT target.