JRC JMR-5410-6X - Setting the Other Ships Tracks; Clearing Other Ships Track; Saving and Loading Other Ships Track Data; Setting Other Ships Track Colours

6-45 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
6.8.2 Setting the other ship's tracks
This function makes settings for the tracks of tracked targets and AIS targets.
This equipment can display the tracks of up to 30 target ships.
6.8.2.1 Setting track colour
For the details on how to set the track colour of tracked target, refer to "6.5.6.2 Setting track colour of
tracked target". For the details on how to set the track colour of AIS target, refer to "6.6.6.1 Setting
track colour of AIS target"
6.8.2.2 Turning on/off other ship's track function
For the details, refer to "13.13 Setting the Target Track Function to ON/OFF ".
Memo
Note that when this function is turned off, all the other ship's track functions are turned off. In this
case, the track data of other ships is not saved, so they cannot be traced later.
6.8.2.3 Setting other ship's track colours
You can set either one track colour for all targets under tracking, or individual colours for the ships of
track numbers from 1st to 10th. For the ships from the 11th ship, a colour can be set and displayed for
every 10 ships. For the details, refer to "11.1.7 Setting up the Display of Other Ship's Track".
Memo
If the other ship's track function (Target Track Function) is turned off, the track data of other ships
is not saved.
6.8.2.4 Turning on/off other ship's track display
The target track display function can be turned on/off. Choices for track display are displaying/hiding
the tracks of all ships and Individual (displaying the tracks of individual ships).
For the details, refer to "11.1.7 Setting up the Display of Other Ship's Track".
Memo
Even when Target Track Display is turned off, the track data of other ships is saved if Track display
Interval is set.
6.8.2.5 Setting up the display interval of other ship’s track
A display interval of other ship’s track can be set.
For the details, refer to "11.1.7 Setting up the Display of Other Ship's Track".
Memo
This function is not available when the Target Track Function is turned off.
6.8.2.6 Clearing other ship's track
The other ship's track can be cleared by setting a colour or a track number.
For the details, refer to "11.1.7 Setting up the Display of Other Ship's Track".
6.8.2.7 Saving and loading other ship's track data
Other ship's track data can be saved on HDD and load from the HDD.
(Data can be saved to HDD until the data volume becomes full.)
For the details, refer to "3.23.1 File management".