JRC JMR-5410-6X - Display Unit

2-3 Section 2 Name and Function of Each Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
2.1.2 Display unit
[Power] button
When the Power button is pressed while the power of the display unit is turned off, the power is
turned on.
To turn off the power of the display unit, press the Power button for 5 seconds or longer.
[Brightness Adjustment] buttons
These buttons are used to adjust the brightness of the screen.
The screen increases brightness by pressing the button.
The screen decreases brightness by pressing the button.
Memo
Adjust the brightness of the screen to the extent under which the observation of the RADAR
screen is enabled easily and, at the same time, the screen is not too bright, taking into account the
brightness of the surroundings.
[Brightness Adjustment] [Power] button
buttons