JRC JMR-5410-6X - Highlighting TT;AIS Symbols; Highlighting TT;AIS Symbols by Specifying Search Criteria

6-51 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
6.12 Highlighting TT/AIS Symbols
TT/AIS symbols can be highlight them.
[Operation procedure]
Open the highlighting setup screen by performing the following menu operations.
[Menu] button → TT/AIS → Highlighting
6.12.1 Highlighting TT/AIS Symbols by specifying
search criteria
TT/AIS symbols can be searched by specifying criteria and highlight them.
1 Check [Highlighting by the Following Search Criteria].
2 Check the items you want to make highlighted.
3 Specify search conditions for the checked items.
[TT/AIS] tab
Item
Setting
Transit Direction
Select a transit direction to be highlighted from the combo box.
TCPA (MIN) Specify the minimum and maximum values in the range between
1 to 99 min.
TCPA (MAX)
CPA (MIN)
Specify the minimum and maximum values in the range between
0.1 to 9.9 NM.
CPA (MAX)
SOG (MIN) Specify the minimum and maximum values in the range between
0.0 to 1022.0 kn.
SOG (MAX)
Same Fleet (link) Select a consort ship to be highlighted by linking.
For setting the consort ship preset, refer to “13.10 Setting
Consort Ship Preset”.
[AIS] tab
Item
Setting
Length (MIN) Specify the minimum and maximum values in the range between
1.0 to 1022.0 m.
Length (MAX)
Type of Ship Open the list and click on the type of the ship to be highlighted. For
the details of the types of the ships that can be selected, refer to the
“List of types of ships”.
Cargo Category
Open the list and click on the cargo category to be highlighted.
Registry Ship Specify the MMSI MID Code in the range between 200 and 800.
The registry of ship corresponding to the entered code is displayed.
Navigation
Status
Open the list and select the navigation status to be highlighted. For
the details that can be selected, refer to the “Navigation Status”
table in “6.6.4 Displaying AIS information”.