JRC JMR-5410-6X - Adding Tracked Target ID Name; Setting Track Colour of Tracked Target

6-25 Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
6.5.6.1 Adding tracked target ID name
An ID name can be added to the tracked target acquired.
1 Right-click the cursor on the tracked target.
The context menu is displayed.
2 Click on [Property] on the context menu.
The [TT Target INFO] dialogue box appears
3
Click on the [Name] input box or .
The input method varies with the selected item.
Input box : Enter a new name.
When selected, the ship name ([Name]) entry window opens.
Enter a ship name of up to 15 characters.
: The names registered as templates are displayed in a list.
Select a name from the list.
To register ship names as templates
1 Click on the [Edit Template] button in the [TT Target INFO] dialogue.
The [Template] dialogue is opened.
2 Enter the ship name to be registered as a template in the input text box.
3 Click on the [Register] button.
The entered ship name is registered in the template list.
4 Repeat steps 2 and 3, and register necessary ship names.
To cancel unwanted ship name registration
1 Check the ship’s name whose registration is to be cancelled on the template list in the
[Template] dialogue.
2 Click on the [Delete] button.
The checked ship name is deleted from the template list.
6.5.6.2 Setting track colour of tracked target
The track colour of tracked target is set.
1 Right-click on the cursor at the tracked target.
2 Click on the [Property] on the context menu.
The [TT Target INFO] dialogue box appears.
3 Select a track colour from the [Track Colour] list.
The selection items are as follows.
Off, No.1-Colour, No.2-Colour, … , No.10-Colour, No.11 to 20-Colour, No.21 to 30-Colour, …,
No.91 to 100-Colour
* In [Colour], the track colour name that was set by selecting menus, [Vew] - [Target Track] -
[Plot] tab is displayed. For the details, refer to “11.1.7 Setting up the Display of Other Ship’s
Track”.
