JRC JMR-5410-6X - Rectangle Cursor

3-25 Section 3 Common Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
3.14 Rectangle Cursor
The rectangle cursor is a symbol imitating the shape of a net with the assumption of the use in trawl
fishing.
[Operation procedure]
Use the following menu operation to open the setup screen of the rectangle cursor.
[Menu] button → Tools → Rectangle Cursor
The following table shows the setting items.
Setting item
Contents
Setting value
Rectangle Cursor No.
Select a rectangle cursor number.
1 / 2
Display Displays/hides the rectangle cursor. Display: Checked
Hide: Unchecked
Unit of Distance Changes the length of one member of range 1 or
range 2.
NM / km / sm
Make Rectangle
Cursor
Changes the cursor mode to the rectangle cursor
edit mode. When the rectangle cursor display is set
to Off, the display is set to On.
-
Diagonal 1 In rectangle cursor edit mode, set the length of
range 1 by using the [EBL] dial.
Turn clockwise: +, Turn anti-clockwise: -
It is possible to set from the numeric value input
keyboard by selecting an input box.
0.001 to 10.000NM
Diagonal 2 In rectangle cursor edit mode, set the length of
range 2 by using the [EBL] dial.
Turn clockwise: +, Turn anti-clockwise: -
It is possible to set from the numeric value input
keyboard by selecting an input box.
0.001 to 10.000 NM