JRC JMR-5410-6X - Chart; Common; Special Line; Managing Special Line Data

9-1 Section 9 Chart
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Section 9 Chart
Use the [Chart] menu for the operations relating to charts.
9.1 Common
9.1.1 Special Line
9.1.1.1 Managing special line data
Manage special line data in the Chart Maintenance menu.
Open the “Chart Maintenance” screen from the Mode Selection screen.
The [Import Special Line] button is assigned on the “Chart Maintenance” screen.
Insert the USB containing the special line data to be imported and execute Import.
The procedure for importing special line data is provided below.
1 Click on the [Import Special Line] button.
A selection screen for special line data to be imported is displayed.
2 Select special line data to be imported from the folder list in the USB and click on the
[OK] button.
The [OK] button can be clicked on only when the special line data at the level that can be
imported is selected from the folder list.
3 When an import verification screen is displayed, click on [OK] when continuing
import.
4 When Import is successful, an import successful popup window is displayed.
Terminate the processing by clicking on the [OK] button.
When Import failed, a popup window is displayed notifying the import failure. The cause of the
failure may be due to insufficient free space or removal of the USB card during import
processing.