JRC JMR-5410-6X - Using Video Processing (Echo Process)

Section 5 Basic Operation of the Radar 5-16
5.4.4 Using video processing (Echo Process)
This function reduces undesirable noise and enhances targets.
Memo
• When viewing a radar beacon, SART signal, or fast moving target on the radar display, select
[Process Off] (video process off).
• If video processing mode is set to [CORREL], a high speed target is less-visible .
1 Select a video processing mode from [Echo Process] (video processing) list of Radar
signal information.
Setting items
Effects and recommended use conditions
Process Off
Sets the image processing function to Off.
3 Scan CORREL
Use when the rain/snow clutter images are heavy.
4 Scan CORREL
Use when enhancing the target while suppressing sea clutter images.
5 Scan CORREL
Use when detecting small targets in sea clutter images.
Remain
Use when own ship is rolling severely.
Peak Hold
Use for detection of small targets of low detection probability.
[Echo Process] (video
processing) combo box