JRC JMR-5410-6X - Creating an EBL Manoeuvre Curve

4-29 Section 4 Range and Bearing Measurement Methods
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
4.7.2 Creating an EBL manoeuvre curve
1 Set the function to [ON] by clicking on the [Display Manoeuvre curve] button.
A supplemental line, a manoeuvre curve, and a WOL for creating a manoeuvre curve are
displayed and the manoeuvre curve creation mode is set.
The bearing of the supplementary line can be changed by turning the EBL dial during creation of
a manoeuvre curve.
2 Determine a supplemental line starting position by clicking.
Memo
When the WOL position is behind the own ship, the colour of WOL changes to red and the
supplemental line starting point can no longer be determined by clicking on the point.
Cancelling the creation of manoeuvre curve
When you right-click in manoeuvre curve creation mode, the creation can be cancelled.
Click
Supplemental line
Heading line
WOL
Manoeuvre curve
Starting position of
supplemental line