Section 3 Common Basic Operations 3-44
3.23.1.1 Copying a file
This section describes file management by using the example copying a file in the file list of the drive
that is specified in the [Drive] combo box on the left hand side of the dialogue box to the drive that is
specified in the [Drive] combo box on the right hand side.
1 Click on the [File Management] tab.
2 Select the drive that contains the file to be copied from the [Drive] combo box.
Files in the drive are displayed in the list.
The following file types can be displayed by the [File Management] tab.
File type File extension Contents
User Map uchr User map
Own Track otr Own ship’s track
Track of other ship (including the GPS buoy)
Screen Shot (AUTO) png Automatically generated screen shot
Screen Shot (User) png Manually generated screen shot
Preference ini Personal setting
3 Select the files to be copied by checking them.
4 Select a drive of the storage destination from the [Drive] combo box and select a copy
location from the folder tree that is displayed.
5 Click on the [Copy>>] (copy to the right) button.
The files will be copied. When the drive of the copy source and the drive of the copy destination
are reversed, click on the [<<Copy] (copy to the left) in Step 5.
3.23.1.2 Deleting a file
1
Select a file to be deleted by checking it. Click on the [Delete] button.
A deletion confirmation dialogue is displayed.
2 To delete the file, click on the [OK] button.
To Next Page
Loading...
