JRC JMR-5410-6X - Creating a Text with EBL;VRM Operation; Editing a Text

10-21 Section 10 Creating a User Map
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10.6.3.2 Creating a text with EBL/VRM operation
1 Click on the [EBL/VRM] button on the drawing toolbar.
The cursor changes to the EBL/VRM reference point cursor. (Refer to "10.5.5 Creating an
object in the EBL/VRM mode").
2 Click on the position of the reference point position of the EBL/VRM marker.
The EBL/VRM marker is displayed.
3 Place the EBL/VRM marker on the position on which an object is to be created and
click the button.
An object is created on the position on which the button was clicked and the property
information is reflected in the object property dialogue. (Refer to "10.5.8 Object property
dialogue").
4 Adjust the parameters on the object property dialogue box.
For the text input method, refer to "10.6.3.3 Editing a text", for the template usage method, refer
to "10.6.3.4 Editing a template", and for the text angling method, refer to "10.6.3.5 Changing a
text angle".
5 To create an object on another position continuously, repeat Steps 2 to 4.
10.6.3.3 Editing a text
1 Click on the [Text] input box
A character input full keyboard is displayed.
2 Create a text.
For the method of using the character input full keyboard, refer to "3.19.2 Name and function of
each section of the keyboard".
3 Close the character input full keyboard by clicking on the [Enter] key.
4 To change a character colour, select a required character colour from the [Colour]
combo box.
5 To change a font size, select a required font size from the [Font Size] combo box.