Section 3 Common Basic Operations  3-28 
3.15.2  AIS 
 
[Sleeping AIS target target] 
When a sleeping AIS target is clicked on, the AIS target is activated. 
 
[Activated AIS target] 
When an Activated AIS target is clicked on, the AIS target value is displayed. 
 
[Numeric displayed AIS target] 
When the numeric displayed AIS target is clicked on, the AIS target value display is cancelled. 
 
[AIS-SAR aircraft normal target] 
When an AIS-SAR aircraft in the normal state is clicked on, the AIS-SAR aircraft is selected and the 
AIS-SAR aircraft value is displayed. 
 
[Numeric displayed AIS-SAR aircraft] 
When a numeric displayed AIS-SAR aircraft is clicked on, the sleeping target of the AIS-SAR aircraft is 
displayed and the AIS-SAR aircraft value display is cancelled. 
 
[Sleeping AIS-SAR vessel target] 
The same operation as the normal sleeping AIS target is performed. 
 
[Activated AIS-SAR vessel target] 
The same operation as the normal activated AIS target is performed. 
 
[Numeric displayed AIS-SAR vessel target] 
The same operation as the normal numeric displayed AIS target is performed. 
 
[Sleeping AIS-SART] 
The same operation as the normal sleeping AIS target is performed. 
 
[Activated AIS-SART] 
The same operation as the normal activated AIS target is performed. 
 
[Numeric displayed AIS-SART target] 
The same operation as the normal numeric displayed AIS target is performed. 
 
[AtoN normal target] 
When AtoN target in a normal state is clicked on, the AtoN normal target is selected and the numeric 
value of AtoN is displayed. 
 
[Numeric displayed AtoN target] 
When a numeric displayed AtoN target is clicked on, the AtoN normal target is deselected and the 
numeric value of AtoN normal target is cancelled. 
 
[AIS-shore base station normal target] 
When an AIS-shore base station target in a normal state is clicked on, the AIS-shore base station is 
selected and the numeric value of AIS-shore base station is displayed. 
 
[Numeric displayed AIS-shore base station normal target] 
When an AIS-shore base station in a normal state is clicked on, the AIS-shore base station is 
deselected and the numeric value of AIS-shore base station is cancelled.