JRC JMR-5410-6X - Loading Files; Saving Files; Unloading Data (Clearing Data from the Data Screen)

Section 3 Common Basic Operations 3-46
3.23.2.1 Loading files
1
Click on the [File Load/Save] tab.
2 Select a file to be loaded.
Memo
Only one file can be selected each time.
3 Select the file loading mode from the [Load Mode] combo box.
4 Click on the [Load] button.
A confirmation dialogue box appears.
5 Click on the [OK] button.
The selected file is loaded.
3.23.2.2 Unloading data (clearing data from the data screen)
1
Click on the [File Load/Save] tab.
2 Select a file type from the [File type] combo box.
3 Click on the [Save Current Target Track] button.
Memo
The name of the Delete button varies according to the file type.
A confirmation dialogue box appears.
4 Click on the [OK] button.
The Target track data that is stored is cleared from the screen.
3.23.2.3 Saving files
1
Click on the [File Load/Save] tab.
2 Select a file type from the [File type] combo box.
3 Click on the [Save Current Target Track] button.
Memo
The name of the Save button varies according to the file type.
A confirmation dialogue box appears.
4 Enter a name under which the file is saved in the input box and click on the [OK]
button.
The Target Track that is stored is saved.