JRC JMR-5410-6X - Setting Associations

13-13 Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
13.8 Setting Associations
Set TT/AIS.
[Operation procedure]
Open the TT/AIS setting screen by performing the following menu operations.
[Menu] button → Settings → Association
The AIS target and the tracking target are checked if they are identical and if so, an association symbol
is displayed for the targets. In this case, the AIS target symbol is automatically activated.
Memo
If you don't want to perform an identical target judgement, or if you want to display hidden
symbols, turn the association setting to Off.
Setting Item Description of Setting Setting Value
Association Turn On/Off the association setting. To enable: Select.
To disable: Clear.
Priority Select a priority of association target display. AIS / TT
Bearing
Set up the bearing difference of the association
target.
0.0 to 9.9°
Range
Set up the range difference of the association
target.
0 to 999 m
Course
Set up the course difference of the association
target.
0 to 99°
Speed
Set up the speed difference of the association
target.
0 to 99.9 kn
Applicable AIS Target
Select a state of the AIS which will be an
association target. Only the AIS target you
specified will be an association target.
ACT / ACT & Sleep