JRC JMR-5410-6X - Confirming Operating Time

Section 15 Maintenance & Inspection 15-4
15.1.4 Confirming operating time
Confirm the operating time of this system.
[Operation procedure]
Open the equipment operating time confirmation screen by performing the following menu operations.
[Menu] button → Maintenance → Operating Time
The following table show the contents displayed.
Item Displayed information
Operating Time of Display Unit
Total
Total operating time of this equipment
LCD FAN
Total LCD fan operating time. The estimated replacement time is indicated
in ( ).
RPU FAN Total RPU fan operating time. The estimated replacement time is indicated
in ( ).
Operating Time of Scanner Unit
Total
Total operating time of the radar antenna
Transmit
Total operating time of the transmitter. The estimated replacement time is
indicated in ( ).
Motor
Total operating time of the motor. The estimated replacement time is
indicated in ( ).
FAN
Total operating time of the radar antenna fan. The estimated replacement
time is indicated in ( ).
This item is displayed only when the current radar antenna (magnetron/small
solid state) is connected.
PS FAN Total operating time of the power supply unit fan. The estimated replacement
time is indicated in ( ).
This item is displayed only when a new type of radar antenna
(NKE-2255-7/9/6HS) is connected.
TX FAN Total operating time of the fan of the transmission unit.
The estimated
replacement time is indicated in ( ).
This item is displayed only when a new type of radar antenna
(NKE-2255-7/9/6HS) is connected.
Memo
[Operating Time of Scanner Unit] is displayed only when the radar antenna is connecetd in
RADAR mode.