JRC JMR-5410-6X - Switching the Mode; Function Restriction by Mode

3-17 Section 3 Common Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
3.10 Switching the Mode
Switch the mode between the radar mode and the synthesis mode.
1 Click on the mode switching button on the right tool bar.
Whenever the button is clicked on, the mode switches repeatedly as [Radar mode] →
[Synthesis mode] → [Radar mode].
The mode switching button icon also changes by linking with mode switching.
Mode
Icon
Radar mode
Synthesis mode
3.10.1 Function restriction by mode
Some functions are restricted in radar mode.
The following functions are restricted.
Function
Radar mode
Synthesis mode
Own ship’s track display Not available (Own ship’s track can be set.
Track data is also accumulated.)
Available
Other ship’s track display Not available (Tracks of other ships can be
set. Track data is also accumulated.)
Available
Dragging anchor monitor
display
Not available (Dragging anchor is
monitored and alerts are also notified.)
Available
Rectangle cursor Not available (A rectangle cursor can be
set.)
Available
Edit Reference Mark Not available (Standard display of Edit
Reference Mark in (Cursor Readout) and
any reference point can be set.)
Available
NAVTEX mark Not available (The NAVTEX mark can be
set.)
Available
Fishing ground display Not available (A fishing ground can be
set.)
Available
User map
Available
Available