JRC JMR-5410-6X - AIS Filter; User Map; Non-Selected Object

Section 3 Common Basic Operations 3-30
3.15.5 AIS filter
[Sector (start angle)]
When Sector (start angle) is clicked on, the cursor is set to the Sector (start/end angle) change mode.
[Sector (end angle)]
When Sector (end angle) is clicked on, the cursor is set to the Sector (end angle) change mode.
[Ring]
When Ring is clicked on, the cursor is set to the Ring change mode.
Memo
The values of Sector (start angle) and Sector (end angle) indicate relative bearings based on the
ship’s heading as the standard.
3.15.6 User map
The operation of an object in the unselected state is different from that of an object in the selected
state.
3.15.6.1 Non-selected object
When an object created on the user map is clicked on, the object is selected and the property screen of
the object is displayed.
Sector
(Start angle)
Ring
Own ship
Sector
(End angle)
* The section other than the
sides of the sector is not
targeted for selection.