Section 6 Target Tracking and AIS 6-48
7 To save an MMSI code and a typed message in the case of MMSI transmission, click on
the [Save] button.
8 Click on the [x] button to close the dialogue box.
To send a message by specifying an MMSI code:
1 Select the [Addressed] radio button.
2 Type an MMSI code (9 digits) in the [MMSI] input box.
The name of the ship having the entered MMSI code is displayed in the [Name] box.
The identification number is displayed in the [Target ID] box.
3 Type a message in the message input area.
In the case of a safety related message: Maximum 156 characters
In the case of a routine message: Maximum 151 characters
To distribute a broadcast message:
1 Select the [Broadcast] radio button.
2 Type a message in the message input area.
In the case of a safety related message: Maximum 161 characters
In the case of a routine message: Maximum 156 characters
To Next Page
Loading...
