JRC JMR-5410-6X - Page 406

Section 13 Setting up the Operation Mode 13-34
Setting Item Description of Setting Setting Value
Warning Set the volume of the system alarm sound.
*2
Off
Level1 (Soft)
Level2
Level3
Level4 (Loud)
Emergency Alarm
Set the volume of the emergency alarm
sound. *2
Level1 (Soft)
Level2
Level3
Level4 (Loud)
[Melody] tab
Setting Item Description of Setting Setting Value
Navigation 1 Set the melody of the Navigation 1 alarm. Sound1
Sound 2
Sound 3
Sound 4
Navigation 2 Set the melody of the Navigation 2 alarm. Sound 1
Sound 2
Sound 3
Sound 4
Navigation 3 Set the melody of the Navigation 3 alarm. Sound 1
Sound 2
Sound 3
Sound 4
CPA/TCPA Alarm Set the melody of the CPA/TCPA alarm. Sound 1
Sound 2
Sound 3
Sound 4
Warning alarm Set the melody of warning alarm. Sound 1
Sound 2
Sound 3
Sound 4
*1 Navigation 2 and Navigation 3 are not practically used.
*2 These volumes may not be selected except Level 4 (Loud) depending on the setting.