Section 13 Setting up the Operation Mode 13-36
[AZ Keys] tab
Setting Item Description of Setting Setting Value
AZ 1 When this is selected, AZ1 can be turned On/Off by
pressing the [AZ] key.
All checked items can be turned On/Off at once by
To enable: Select.
To disable: Clear.
AZ 2 When this is selected, AZ2 can be turned On/Off by
pressing the [AZ] key.
All checked items can be turned On/Off at once by
To enable: Select.
To disable: Clear.
Sector Alarm1 When this is selected, Sector Alarm 1 can be turned
On/Off by pressing the [AZ] key.
All checked items can be turned On/Off at once by
To enable: Select.
To disable: Clear.
Sector Alarm 2 When this is selected, Sector Alarm 2 can be turned
On/Off by pressing the [AZ] key.
All checked items can be turned On/Off at once by
To enable: Select.
To disable: Clear.
Polygon Alarm1 This function cannot be used now. To enable: Select.
To disable: Clear.
Polygon Alarm 2 This function cannot be used now.
To enable: Select.
To disable: Clear.
Polygon Alarm 3 This function cannot be used now. To enable: Select.
To disable: Clear.
Polygon Alarm 4 This function cannot be used now.
To enable: Select.
To disable: Clear.
Polygon Alarm 5 This function cannot be used now.
To enable: Select.
To disable: Clear.
Polygon Alarm 6 This function cannot be used now. To enable: Select.
To disable: Clear.
To Next Page
Loading...
